HP Cell Phone Accessories 8935 사용자 설명서
52
Chapter 3
Utility Procedures
Memory Cards
Memory Cards
The slot on the front of the Test Set is used for memory cards. The slot
is used for the following:
is used for the following:
• Storage of save/recall registers
• Loading of software (either HP or self-written)
• Collecting data (only when using software)
• Upgrading firmware or software
Memory Cards and Intialization
There are several types of memory cards available, and the following
cards are used with the Test Set:
cards are used with the Test Set:
• SRAM: used for save/recall and data storage
• Flash ROM: used when upgrading firmware
• OTP (One-Time Programmable): used for HP software
Flash ROM cannot be used for collecting data and Save/Recall.
Data cannot be loaded on Flash RAM and OTP cards with the Test Set’s
memory card slot.
memory card slot.
SRAM can be initialized with the Test Set.
Initializing SRAM Cards for Save/Recall and Data
Collection
Collection
1. Insert the SRAM card into the slot. If the card is uninitialized, a
message will appear at the top of the display.
2. Press
Shift
and
IO Confg
to display the I/O CONFIGURE screen.
3. Using the knob, locate the
FORMAT CARD
field.
4. Select the
FORMAT CARD
field. A prompt will appear at the top of
the display. Pressing
Yes
will erase and initialize the card.
Main Menu