Horstmann C-Stat ZW 사용자 가이드
Setting the OPTIMUM START
This setting will allow the C-Stat to anticipate the next set
temperature and switch on up to two hours in advance to ensure
room temperature has been reached by the time the new set
temperature applies.
temperature and switch on up to two hours in advance to ensure
room temperature has been reached by the time the new set
temperature applies.
As a consequence the switch on time could take place anywhere
between 2 hours and zero before the set time and temperature.
between 2 hours and zero before the set time and temperature.
With the optimum start set to OFF the user will need to anticipate
the warm up time needed in the programme settings. (Typically
the set temperature will be set approx. 1 hour in advance of
when it is required)
the warm up time needed in the programme settings. (Typically
the set temperature will be set approx. 1 hour in advance of
when it is required)
Pressing the BACK at any time in this process will return you to
normal operating mode
normal operating mode
This feature would normally be set by your installer.
Press ENTER twice
Press ENTER
Press '-' or '+' until
Optimum Start
appears on the
display
Optimum Start
appears on the
display
Press '-' or '+' until
Set Up appears on
the display
Set Up appears on
the display
Select YES or NO
and press ENTER
to confirm
and press ENTER
to confirm
20