Horstmann C-Stat ZW 사용자 가이드
Cancelling the TAMPER SETTING
Pressing BACK at any time in this process will return you to
normal operating mode
normal operating mode
Press ENTER twice
Press ENTER
The following
message will appear
'Enter first digit'
message will appear
'Enter first digit'
The following
message will
appear 'To enter
release code press
ENTER'
message will
appear 'To enter
release code press
ENTER'
Repeat the
previous step for
the second, third
and fourth digits
previous step for
the second, third
and fourth digits
Press '-' or '+' to
confirm the first
digit of the release
code, then press
ENTER
confirm the first
digit of the release
code, then press
ENTER
The following
message will appear
'Tamper Code
Cleared'
message will appear
'Tamper Code
Cleared'
22
SET UP Z-WAVE
The ASR-ZW receiver unit receives the
Z-Wave radio signals from the C-Stat
programmable room thermostat. In the
unlikely event of a communication
failure it is possible to override the
system and switch On and Off using the
On/Off buttons on the ASR-ZW receiver
as a local override.
Z-Wave radio signals from the C-Stat
programmable room thermostat. In the
unlikely event of a communication
failure it is possible to override the
system and switch On and Off using the
On/Off buttons on the ASR-ZW receiver
as a local override.
If you do not know the release code, contact the
Homeowner or Landlord in the first instance.
Homeowner or Landlord in the first instance.
If you are the Homeowner or Landlord have
forgotten the code, contact Horstmann Technical
who will be able to provide you with an override
code once various security questions have been
answered satisfactorily.
forgotten the code, contact Horstmann Technical
who will be able to provide you with an override
code once various security questions have been
answered satisfactorily.