Extech Instruments S4500THS 사용자 설명서
Portable Printing Solutions
S4500THS User Guide
Extech Instruments Corporation 285 Bear Hill Road, Waltham, MA 02451-1064 Phone: 1-877-4-EXTECH (439-8324) Fax: (781) 890-7864 Web site: www.extech.com
Copyright © 2005 Extech Instruments Corporation. All rights reserved including the right of reproduction in whole or in part in any form.
8
3.2 C
ONNECTING
THE
P
RINTER
The S4500THS printer supports Serial RS232 and IrDA compatible infrared
communication interfaces. Radio frequency (RF) Bluetooth communication is
available as an optional feature as well as 802.11b interface.
available as an optional feature as well as 802.11b interface.
Serial, IrDA, Bluetooth and 802.11b communication settings can be changed
via a DIP switch located on the control card.
The DIP switch is located inside the battery compartment as illustrated
above indicating the location of this switch. Figure 6 shows the
DIP switch location.
DIP switch location.
The functions assigned to these switches are shown in Table 2.
If the Serial interface is selected, the communication Parameters, Baud rate,
Data Bit and Parity must be set.
Note: Optional serial cable is available for Serial RS232 communication
(part # 5892RJD9).
Printer drivers for Windows 95/98/NT/2000 and XP are available from Extech.
Printer CE print Control utility is available from Extech for
Windows CE devices.
Printboy Print Utility from Bachmann Software or PalmPrint Utility, from
StevensCreek, are recommended for Palm Pilot devices
F
IGURE
5 – S
AMPLE
S
ELF
T
EST
F
IGURE
6: D
IP
S
WITCH
L
OCATION