Eventide DJ Equipment DSP4000B+ 사용자 설명서
The Harmonizer
Programmer’s Manual
The Harmonizer
Programmer’s Manual
Page 86 of 97
Release 1.2.1
1999 Eventide, Inc.
Resolution
The
The
resolution
specifier controls what minimum change in a parameter value can be achieved by turning the
KNOB
or by using the
INC
or
DEC
key on the numeric keypad. The
resolution
parameter also controls the
“rate of change” as the
KNOB
is spun. If the
resolution
is very fine, the parameter value will increment in
“baby steps” as the
KNOB
is spun. If the
resolution
is very course, the parameter value will increment in
“great leaps” as the
KNOB
is spun.
For example, if the selected parameter displays a value of
45.30
and the
resolution
is
1.0000
, then slow
motion clockwise rotation on the
KNOB
will change the value to
46.30
(unless the
max value
is less than
46.30
!)
. If
the selected parameter displays a value of
45.30
and the
resolution
is
0.1000
, then slow motion
clockwise rotation on the
KNOB
will change the value to
45.40
.
As yet another wee exercise, use the
<modify>
SOFT KEY
the same way as in the Min and Max Value
section and adjust the
resolution
specifier of the
knb
module. Notice the difference this makes in the “step
size” of the
Each Delay
parameter value.
(You’ll have to walk yourself through this one. . .)