Eventide DJ Equipment DSP4000B+ 사용자 설명서
The Harmonizer
Programmer’s Manual
The Harmonizer
Programmer’s Manual
Page 88 of 97
Release 1.2.1
1999 Eventide, Inc.
The
8 char name
is used only if this module’s userobject is
connected directly to the head module. Normally its userobject
will be connected a menupage module. Refer to the Modules
Section for complete information.
Section for complete information.
Percentknob Module
The percentknob module is very similar to the knob
module. The only difference is that the control output value is
The percentknob module is very similar to the knob
module. The only difference is that the control output value is
divided by 100. Refer to the Modules Section for complete
information.
information.
Tapknob Module
The tapknob module is a modification of the standard knob
module. Just like the knob module, the
The tapknob module is a modification of the standard knob
module. Just like the knob module, the
menu statement
is
used to create the 20-character text display. However, instead of
using the
using the
%f
format, the
%s
format is used. The tapknob
module creates an 8-character numeric result that is inserted in
place of the
place of the
%s
.
The tapknob module creates a tapered (non-linear) control that
has a “selectable” number of
steps
(instead of the usual
resolution
parameter) and a “selectable”
taper
waveform. The
greater the
taper
specifier, the more non-linear the parameter
response. Refer to the Modules Section for complete
information.
Rfader Module
The rfader module creates a graphic on the
The rfader module creates a graphic on the
PARAMETER
screen. The graphic, including title, takes up four lines of the
screen and one quarter of the width of the screen. Up to four of
screen and one quarter of the width of the screen. Up to four of
these modules can fit on one menu page.
Nine characters of the menu statement are displayed above the
graphic as a title. Refer to the Modules Section for complete
graphic as a title. Refer to the Modules Section for complete
information.