Epson Portable Media Storage P-2000 사용자 설명서

Note: 
The P-2000 stops charging if the battery becomes hot when 
operating it during charging. It will start charging again when it 
cools down.

If you plan to store the P-2000 for an extended period of 
time, you should remove the battery.

Make sure the P-2000 is turned off. 

Caution: 
Remove the AC adapter if it is connected to the P-2000.

Never remove the battery while the P-2000 is turned on. 
Doing so may cause files to be lost or damaged.

Open the battery cover.

Push the catch down. The battery pops out.

Pull out the battery. Then close the battery cover.

To conserve battery power and protect the LCD screen, the 
P-2000 has two power-saving features. If no button has 
been pressed and there has been no activity for 10 minutes, 
the backlight on the LCD screen is turned off. After 15 
minutes, the power is turned off. 

Note: 
You can change the number of minutes for these settings; see 
“Setting the Power Save Options” on page 49.

If the screen goes dark because the backlight is turned off, 
press any button on the P-2000 to resume operation. If the 
P-2000 has been powered off, you need to turn it back on 
with the power switch.

Note: 
The power is also turned off if the P-2000 gets too hot. If this 
happens, let it cool before turning it back on.

Catch