Epson Portable Media Storage P-2000 사용자 설명서
Getting Started 9
About the AC Adapter
The P-2000 comes with an AC adapter. Use the adapter to
charge the battery and when the P-2000 is connected to a
computer or printer. You might also want to use it whenever
possible to view videos or photos, so you can save battery
power.
charge the battery and when the P-2000 is connected to a
computer or printer. You might also want to use it whenever
possible to view videos or photos, so you can save battery
power.
Warning:
Use only the AC adapter provided, which is designed for the
P-2000. Using another adapter could cause fire, electrical shock,
or injury.
Use only the AC adapter provided, which is designed for the
P-2000. Using another adapter could cause fire, electrical shock,
or injury.
Do not use the AC power cord or the adapter for any purpose
other than powering the P-2000.
other than powering the P-2000.
To prevent fire or electric shock, do not cover the AC adapter
with a blanket or similar covering.
with a blanket or similar covering.
Do not connect the AC adapter when the battery is not installed;
this can damage the P-2000.
this can damage the P-2000.
Do not remove the AC adapter from this device during
operations. You can, however, connect the adapter during
operations.
operations. You can, however, connect the adapter during
operations.
Installing the Battery
The P-2000 comes with a Lithium-ion battery. Follow these
steps to install it:
steps to install it:
1
Turn the P-2000 upside down and slide the battery
cover to the left to open it.
cover to the left to open it.
2
Insert the battery into the compartment as shown. Make
sure the gold contacts on the battery go in first.
sure the gold contacts on the battery go in first.