Fill-rite Water Pump FR405 사용자 설명서

3

Power to the unit should be supplied from a dedicated
circuit breaker. No other equipment should be  powered
from this breaker. Provision must be made to break both
legs of any AC circuit.

If a meter is used, calibrate according to the instructions in
the meter’s Owner's Operation & Safety Manual.

Mounting Holes

The basic pump is furnished with 1" NPT threaded openings in
the inlet and outlet flanges.  Flanges are available as a straight
outlet or a 90

o

 angle design, which can be rotated four ways to

accommodate different installation needs.  Both inlet and
outlet flanges include four 1/4-20 threaded holes, spaced
1 7/8" between centers, for secure mounting.

Adapters are available to fit the pump to a 2" bung and a
selection of standard bung fittings common in the petroleum,
chemical and agricultural markets.
Use pipe compound or Teflon® tape on all threaded fittings
(except 2" bung threads if present).

DC ONLY: 

DC ONLY: 

DC ONLY: 

DC ONLY: 

DC ONLY: Connect cable  to 12 volt DC power supply as
follows, paying special attention to wire colors:

If pump is to be mounted on a vehicle, it is recommended
that permanent wiring and connections be made to vehicle
power system which includes a 30 amp slow blow fuse.

Positive

Red

Negative

Black

Not for use with fluids that

Not for use with fluids that

Not for use with fluids that

Not for use with fluids that

Not for use with fluids that
have a flash point below

have a flash point below

have a flash point below

have a flash point below

have a flash point below
100°F (37.8°C, ie: gasoline,

100°F (37.8°C, ie: gasoline,

100°F (37.8°C, ie: gasoline,

100°F (37.8°C, ie: gasoline,

100°F (37.8°C, ie: gasoline,
alcohol). Refer to NFPA

alcohol). Refer to NFPA

alcohol). Refer to NFPA

alcohol). Refer to NFPA

alcohol). Refer to NFPA
325M (Fire Hazard Proper-

325M (Fire Hazard Proper-

325M (Fire Hazard Proper-

325M (Fire Hazard Proper-

325M (Fire Hazard Proper-
ties of Flammable Liquids,

ties of Flammable Liquids,

ties of Flammable Liquids,

ties of Flammable Liquids,

ties of Flammable Liquids,
Gases, and Volatile Solids)

Gases, and Volatile Solids)

Gases, and Volatile Solids)

Gases, and Volatile Solids)

Gases, and Volatile Solids)
for flash points of common

for flash points of common

for flash points of common

for flash points of common

for flash points of common
liquids. Static electricity

liquids. Static electricity

liquids. Static electricity

liquids. Static electricity

liquids. Static electricity
buildup and discharge could

buildup and discharge could

buildup and discharge could

buildup and discharge could

buildup and discharge could
result in arc and explosion.

result in arc and explosion.

result in arc and explosion.

result in arc and explosion.

result in arc and explosion.

EXPLOSION PROOF MOTOR

OPTION: Electrical wiring
should be done by a licensed
electrician in accordance
with approved electrical
codes.  Motor should be prop-
erly grounded and a rigid con-
duit should be used when in-
stalling electrical wiring. Im-
proper use or installation of
this product can cause seri-
ous bodily injury or death.