American Power Conversion 3-in-1 Wireless Mobile Router 사용자 설명서
The Ethernet (WAN) Port Configuration Screen
4-9
To determine which method to use, contact the System Administrator. The following screen shows all the available settings.
Figure 18. Ethernet Port Configuration (All Settings)
The following table describes all possible fields on the Ethernet Port Configuration screen.
Connection Type
Connection Type
The available options are:
Travel Mode (Hotel) - This is the default. No data needs to be input. This setting will work in many
Travel Mode (Hotel) - This is the default. No data needs to be input. This setting will work in many
situations, not just hotels.
PPPoE - The most common login method for DSL modems. Normally, the ISP will provide some
PPPoE - The most common login method for DSL modems. Normally, the ISP will provide some
software to connect and login. If using the APC 3-in-1 Wireless Mobile Router, this software is not
required, and should not be used.
PPTP - Used mainly in Europe. The PPTP Server address, username, and password are required.
L2TP - Not widely used. The L2TP Server address, username, and password are required.
No Login (Static IP address) - Used with a static (fixed) IP address. Users do not need to log in to a
PPTP - Used mainly in Europe. The PPTP Server address, username, and password are required.
L2TP - Not widely used. The L2TP Server address, username, and password are required.
No Login (Static IP address) - Used with a static (fixed) IP address. Users do not need to log in to a
server to gain access to the LAN or WAN.
Login User Name
The username (or account name) provided by the ISP.
Login Password
The password for the login name above.
Server IP Address
For PPTP or L2TP, enter the server IP address.
For other connection methods, this field should be ignored.
For other connection methods, this field should be ignored.
Connection
Behavior
Select the desired option:
Automatic Connect/Disconnect
Automatic Connect/Disconnect
A connection is automatically made when required, and disconnected when idle for the time period
specified by the Auto-disconnect Idle Time-out.
Manual Connect/Disconnect
Manual Connect/Disconnect
Manually establish and terminate the connection.
Keep alive (maintain connection)
Keep alive (maintain connection)
The connection will never be disconnected by this device. If disconnected by the server, the connection
will be re-established immediately.
Note: Selecting this option does not ensure that the Ethernet (WAN) Port IP address will remain
Note: Selecting this option does not ensure that the Ethernet (WAN) Port IP address will remain
unchanged.
Auto-disconnect
Idle TIme-out
This field has no effect unless using the Automatic Connect/Disconnect setting.
If using this setting, enter the desired idle time-out period (in minutes). After the connection has been
idle for this time period, the connection will be terminated.