American Power Conversion 3-in-1 Wireless Mobile Router 사용자 설명서

The Ethernet (WAN) Port Configuration Screen

4-7

By default, the APC 3-in-1 Wireless Mobile Router will try to obtain an IP address automatically on the Ethernet (WAN) port. If this 
does not work in the current environment, click the Configure button to change the settings for the Ethernet (WAN) port. The following 
sections describe the possible Connection Types:

The default connection method is Travel Mode (Hotel) as shown below.

The following table describes the fields on the Ethernet Port Configuration screen (Travel Mode).

The default is Travel Mode (Hotel).
See the following section for details of the other options, and the settings associated with each option.

 

 

Also called Dynamic IP Address. This is the default, and the most common.

 

Only change this if advised to do so by the person or organization providing the LAN/WAN port 

connection.

 

Also called a Static IP Address. If this option is selected, the following data must be entered.

IP Address - The IP address on the LAN or WAN.

Network Mask - The subnet mask associated with the IP address above.

Gateway IP Address - The address of the router or gateway on the LAN or WAN that the user is 
connecting to.

The DNS (Domain Name Server) address is normally obtained automatically from the DHCP Server 

which provides the IP address.
Note: This option cannot be used with a fixed IP address, since no server is used.

If this option is selected, enter the IP address of the DNS (Domain Name Server) to use.
Note: Select this option when using a Specified (Static) IP address.