Dish Hopper 사용자 설명서

To use the remote to control other devices (such as a TV, DVD or Blu-ray Disc™ player or 
VCR, an audio tuner/preamp or amplifier, or another compatible DISH receiver), you must 
first program the remote to control these devices. You can do this by any of the following 
procedures:

Setting Up Using the Remote Manager on page 71 

Setting Up Using Device Code Tables on page 72 

Setting Up Using Device Codes Scan on page 73 

Setting Up by Learning from Another Remote on page 76

Use the remote control’s mode buttons, SAT (Hopper or Joey receiver), TV (for a TV), 
DVD (for a a disc player or VCR), and AUX (“auxiliary,” for a second TV, DVD/BD or VCR, 
tuner/preamp, audio amplifier, or a second DISH receiver via IR) to set the remote control 
to the right mode for each device. To change the mode, firmly press the button for the 
device you want the remote to control. The mode button lights for about two seconds to 
show you have set the remote to that mode.

To set up your remote to control your devices, use the Remote Manager, as follows:

1

Press MENU, highlight and select the Settings tile, and then Remote Manager.

2

Highlight and select the option for the device mode you want to program:

Select TV Code and follow the on-screen instructions to program the remote in TV 
Mode to control your TV. After programming is complete, the TV Power button will also 
turn your TV on and off in any device mode. When Limited Mode is enabled, only the 
POWER,  MUTE and VOLUME buttons will operate your TV.

Select DVD Code and follow the on-screen instructions to program the remote  in 
DVD Mode to control your DVD or Blu-ray Disc™ player or VCR. When Limited Mode 
is enabled, only the POWER and VCR-function (PLAY, PAUSE, etc.) buttons will 
operate your device.

Select AUX Code and follow the on-screen instructions to program the remote in AUX 
Mode to control your auxiliary device, like an audio receiver or amplifier. You can also 
program AUX mode to control a second TV or disc player, or even certain other DISH 
receivers (via IR commands only). 

3

Highlight and select Save when you are finished. 

Your remote control is programmed automatically in Limited Mode to prevent inadvertent 
commands from being sent to your TV, such as an accidental channel or input change. 
When you use the remote to control your TV in Limited Mode, you will only be able to use 
the POWER, MUTE, and VOLUME buttons. Also, when you use the remote to control your