Dish Hopper 사용자 설명서

VCR (using the mode button for a DVD or AUX device) in Limited Mode, you will only be 
able to use the POWER and VCR-function buttons (like PLAY, PAUSE, etc.).

To turn off Limited Mode so that you can use all of the buttons on your DISH remote to 
control your TV or disc player, do the following:

1

Press MENU, highlight and select the Settings tile, and then Remote Manager.

2

Highlight and select the option for Limited Mode:

Select Enabled to turn Limited Mode on. This is the default.

Select Disabled to turn Limited Mode off. Now buttons function in TV and DVD modes.

3

Highlight and select Save when you are finished. 

Note: Limited Mode is not used if an audio amplifier is programmed on the AUX button.

If you are programming the remote to control a combination device, such as a TV/VCR or 
a TV/DVD, program the remote control in one mode (TV), and then repeat the procedure 
in the other mode. For example, to program the remote to control a TV/VCR combo device 
using codes 622 and 815, follow the instructions to program the remote in TV mode using 
TV code 622, and then repeat the instructions to program in DVD mode to control the VCR 
using code 815. When Limited Mode is enabled, use POWER and VCR-function buttons.

Set up the remote to control other devices using the codes listed in the Remote Manager. 
In the instructions below, the column on the left contains basic procedures to perform and 
the column on the right provides any additional information, if applicable.

1

Turn the device on.

Use the device’s front panel buttons or its own 
remote control.

2

Find the brand name of the device in the 
tables in Remote Manager. 

If the brand isn’t listed, see Setting Up Using Device 
Codes Scan on page 73.

3

Press and hold the mode button until all the 
other mode buttons light up, then release 
the button. The mode button flashes.

For example, for a TV, press and hold the 

TV

 mode 

button until all of the other mode buttons light. When 
you let go of it, the TV mode button will flash.

4

 mode only. Press 0 for a TV, 1 for 

a VCR, or 2 for a tuner or amplifier.

If you’re not programming in 

AUX

 mode, skip to 

step 5.