BMW 2007 X5 4.8i SAV 사용자 매뉴얼
59
that the vehicle could roll if parked on a steep
slope.
slope.
<
If it becomes necessary to also release the
transmission lock of the automatic transmission
manually, follow this sequence:
transmission lock of the automatic transmission
manually, follow this sequence:
1.
If necessary, start by releasing the parking
brake manually.
brake manually.
2.
Then release the automatic transmission's
transmission lock manually, refer to
page
transmission lock manually, refer to
page
.
Information on jump starting and towing from
page
page
.
Releasing
1.
Open the left-hand side panel in the cargo
bay.
bay.
2.
Remove the first-aid kit
*
and the warning
triangle
*
if necessary.
3.
, at the releasing point.
4.
Firmly pull the releasing tool upward against
the mechanical resistance, refer to arrow,
until a considerable increase in force is felt
and the parking brake is then clearly heard
to release.
the mechanical resistance, refer to arrow,
until a considerable increase in force is felt
and the parking brake is then clearly heard
to release.
5.
Stow the releasing tool, warning triangle
*
and first-aid kit
*
and close the left side
panel in the cargo bay.
Only have a malfunction corrected by the
nearest BMW Sports Activity Vehicle
nearest BMW Sports Activity Vehicle
Center or a workshop that works in accordance
with BMW guidelines and uses appropriately
trained personnel. If the parking brake has been
released manually in response to a malfunction,
only technicians can return it to operation.
with BMW guidelines and uses appropriately
trained personnel. If the parking brake has been
released manually in response to a malfunction,
only technicians can return it to operation.
<
Following manual release, the actual sta-
tus of the parking brake may deviate from
tus of the parking brake may deviate from
that displayed by the indicator lamp.
<
Operation after interruptions in power
supply
The parking brake can only be used again
if it was manually released due to an inter-
if it was manually released due to an inter-
ruption in the supply of electrical power. Other-
wise the operation of the parking brake is not
ensured and there is a danger of the vehicle roll-
ing despite the parking brake being set.
wise the operation of the parking brake is not
ensured and there is a danger of the vehicle roll-
ing despite the parking brake being set.
<
Procedure
1.
Switch on the ignition.
2.
Press the button with the brake depressed.
The indicator lamp in the instrument
cluster goes out as soon as the parking
brake is ready for operation again.
Indicator lamp on Canadian models.
cluster goes out as soon as the parking
brake is ready for operation again.
Indicator lamp on Canadian models.
Any noises which occur are normal. Start-up
may take several seconds.
may take several seconds.
Automatic transmission with
Steptronic
In addition to fully automatic operation, you can
also manually shift with the Steptronic, refer to
page
also manually shift with the Steptronic, refer to
page
Transmission positions
P R N D M/S + –
To prevent the vehicle from creeping
after you select a driving position, main-
after you select a driving position, main-
tain pressure on the brake pedal until you are
ready to drive off.
ready to drive off.
<
Online Edition for Part no. 01 41 0 012 501 - © 08/06 BMW AG