Bay Technical Associates BayTech DS72 사용자 설명서

다운로드
페이지 35
DS72 HOST MODULE OWNER’S MANUAL
INSTALLATION
5
INSTALLATION
UNPACKING
Compare the unit and serial number of the equipment you received to the packing slip located on the
outside of the box. Inspect equipment carefully for damage that may have occurred in shipment. If there
is damage to the equipment or if materials are missing, contact BayTech customer service at 228-467-
8231 or call toll free inside the United States at 800-523-2702.
NOTE:   Keep the shipping container and packing material in the event future shipment is
required.
PREPARING THE INSTALLATION SITE
The installation area should be clean and free of extreme temperatures and humidity.
POWER
CAUTION:  This unit is intended for indoor use only.  Do not install near water or expose this
unit to moisture.  To prevent heat buildup, do not coil the power cord when in use.  Do not use
extension cords.  Do not attempt to make any internal changes to the power source.  Do not
attempt to modify any portion or component of a DS72 module unless specifically directed by
BayTech personnel.  BayTech will perform most internal changes.
CAUTION:  Before removing or replacing any modules, turn off main power switch located on
the DS-Series Base Unit. Communication to the DS-Series Data Switch will be disrupted while
power is off.