Wolf DCL-200FD 사용자 설명서
14
ProScaler
High Definition Video Processor
User’s Manual
Connecting Video Equipment
Using an S-Video or a Composite Video Cable
Using an S-Video or a Composite Video cable, a VCR, laser
disc player or other video equipment can be connected to
the labeled input terminals.
Using an S-Video or a Composite Video Cable
Using an S-Video or a Composite Video cable, a VCR, laser
disc player or other video equipment can be connected to
the labeled input terminals.
Connecting to Component Video Equipment
Using a Component Cable
Use a component cable (commercially available) when
connecting to the COMPONENT INPUT terminals, using
component video equipment such as DVD players and DTV*
decoders. Connect using analog component output terminals.
Using a Component Cable
Use a component cable (commercially available) when
connecting to the COMPONENT INPUT terminals, using
component video equipment such as DVD players and DTV*
decoders. Connect using analog component output terminals.
*DTV is the umbrella term used to describe the new digital television
system in the United States.
system in the United States.
The component jack for a DVD and so forth may be indicated
with Y, CB or CR. Connect each jack as shown right.
with Y, CB or CR. Connect each jack as shown right.
Connecting Video Components with an
HDMI to HDMI Cable
Use an HDMI to HDMI cable (supplied accessory) when
connecting HDMI video equipment such as Blu-ray players,
DVD players and more to the six available inputs.
HDMI to HDMI Cable
Use an HDMI to HDMI cable (supplied accessory) when
connecting HDMI video equipment such as Blu-ray players,
DVD players and more to the six available inputs.
HDMI Inputs #1 through #5 are located
on the rear pannel of the ProScaler.
HDMI input #6 is under the removable
WOLF CINEMA logo plate on the panel front.
Note: The S-VIDEO terminal uses a video signal system in which the picture is separated into color and luminance signals to
realize a higher-quality image. To view a higher-quality image, use a commercially available S-Video cable to connect
the INPUT 3 terminal on the projector and the S-Video output terminal on the video equipment.
the INPUT 3 terminal on the projector and the S-Video output terminal on the video equipment.
Note: When connecting the projector to the video equipment in this way, select Component for Input Source in the ProScaler
MENU.
Note: Select the signal output type from the video equipment set up menu
S-Video cable (commercially available)
Composite video cable (commercially available)
Composite video cable (commercially available)
ProScaler
DVD player or
DTV decoder
DTV decoder
Y
Y
Y/G
B-Y
PB
CB
CB
R-Y
PR
CR
CR