Viper 3105V 사용자 매뉴얼
24
© 2012 Directed. All rights reserved.
Programming options
Programming options control what your system does during normal
op er a tion, and require few or no additional parts. However, some
may require additional in stal la tion labor.
op er a tion, and require few or no additional parts. However, some
may require additional in stal la tion labor.
The following is a list of the program settings, with the factory settings
in Bold:
s
in Bold:
s
Active arming (only with the remote) or passive arming (au to mat-
ic arming 30- seconds after the last door has been closed).
ic arming 30- seconds after the last door has been closed).
s
Arming/disarming confirmation siren chirps On or off.
s
The ignition controlled door lock feature On or off: With
this feature on, the doors will lock three seconds after the ig-
nition is turned on, and the doors are closed, and unlock
when the ignition is turned off. The system will not lock the
doors when the ignition is turned on with any door open.
this feature on, the doors will lock three seconds after the ig-
nition is turned on, and the doors are closed, and unlock
when the ignition is turned off. The system will not lock the
doors when the ignition is turned on with any door open.
Ignition lock and unlock are independent features and
can be programmed separately, when using the Bitwriter.
can be programmed separately, when using the Bitwriter.
s
Passive door locking (with passive arming) or active door
locking (only when arming with the remote). Passive lock-
ing allows the vehicle’s doors to lock when the security sys-
tem passively arms (after the 30 second countdown). This
feature only works if passive arming has been programmed.
When programmed for passive arming and active lock, if the
system is disarmed without a door being opened, the system will
re-lock the doors when it passively rearms.
locking (only when arming with the remote). Passive lock-
ing allows the vehicle’s doors to lock when the security sys-
tem passively arms (after the 30 second countdown). This
feature only works if passive arming has been programmed.
When programmed for passive arming and active lock, if the
system is disarmed without a door being opened, the system will
re-lock the doors when it passively rearms.