Namco Bandai Games Welder 90500019 사용자 설명서
Page
38
6-7. Under Base Assembly
DANGER: The drum drive PCB
(see section 6-7-2,
"Names of Under Base Parts")
has areas of high voltage and high temperature even after the power has
been turned OFF. Take care not to touch the PCB to avoid receiving
electric shocks or burns.
been turned OFF. Take care not to touch the PCB to avoid receiving
electric shocks or burns.
DANGER: Ensure that the power is turned OFF before commencing work.
WARNING: This work involves moving the seat assembly from left to right in order to
remove screws. Take care not to trap or injure the other person when
performing this work.
performing this work.
6-7-1.
Removing the Rear Covers (L), (R)
Removing the Rear Cover (L)
1)
Remove the rear guard fence.
2)
Turn the steering wheel all the way to the right, and move the cabinet by
hand so that the rear cover (L) is easier to remove.
hand so that the rear cover (L) is easier to remove.
3)
Remove the security screws (M5x20), and remove the edge guards and
rubber skirts.
rubber skirts.
4)
Remove the nine security screws (M5x12) and two security screws
(M8x20), then remove the rear cover (L)
(M8x20), then remove the rear cover (L)
Removing the Rear Cover (R)
1)
Turn the steering
wheel all the way to
the left and move
the cabinet to the
left by hand so that
the rear cover (R) is
easier to remove.
wheel all the way to
the left and move
the cabinet to the
left by hand so that
the rear cover (R) is
easier to remove.
2)
Remove the rear
cover (R) in the
same way as the
rear cover (L) as
above.
cover (R) in the
same way as the
rear cover (L) as
above.