Namco Bandai Games Welder 90500019 사용자 설명서
Page
39
6-7-2.
Names of Under Base Parts
6-7-3.
Replacing the Drive Castor
NOTE: When replacing the castor, it is recommended that two people perform
the work and safety gloves are worn.
1)
Removing the Castor Unit.
a)
Remove the nut (M10), and remove
the link rod and link arm.
the link rod and link arm.
b)
Remove the Hex head bolt (M8x20),
and remove the nut locking bracket
from the link arm.
and remove the nut locking bracket
from the link arm.
c)
Use the nut locking bracket and turn
the hexagonal nut until it touches the
housing.
the hexagonal nut until it touches the
housing.