Korg Bicycle PS60 사용자 설명서
Appendices
130
MIDI transmission when the PS60’s controllers are used
The following tables show the relation between the MIDI
messages that are transmitted when the PS60’s controllers
are used, and the AMS (alternate modulation source) or
DMS (dynamic modulation source) that correspond to each
MIDI message.
# indicates a fixed function, and * indicates an assignable function.
messages that are transmitted when the PS60’s controllers
are used, and the AMS (alternate modulation source) or
DMS (dynamic modulation source) that correspond to each
MIDI message.
# indicates a fixed function, and * indicates an assignable function.
When you use a controller on the PS60, the corresponding
or assigned control change will be transmitted. The excep‐
tion is that when you move the joystick in the X (horizontal)
direction, pitch bend change messages will be transmitted.
Here we will explain only control changes, but the same
applies for pitch bend change.
When one of the PS60’s controllers is used, a control change
message will be transmitted on the global MIDI channel
(page 72).
Simultaneously, the message will also be transmitted on the
MIDI channel (page 7) of any timbre whose Status (page 7)
is EXT or EX2.
When one of the PS60’s controllers is used, its effect will
apply to any timbre whose Status is INT and whose MIDI
Channel setting is either Gch or the same as the global MIDI
channel.
or assigned control change will be transmitted. The excep‐
tion is that when you move the joystick in the X (horizontal)
direction, pitch bend change messages will be transmitted.
Here we will explain only control changes, but the same
applies for pitch bend change.
When one of the PS60’s controllers is used, a control change
message will be transmitted on the global MIDI channel
(page 72).
Simultaneously, the message will also be transmitted on the
MIDI channel (page 7) of any timbre whose Status (page 7)
is EXT or EX2.
When one of the PS60’s controllers is used, its effect will
apply to any timbre whose Status is INT and whose MIDI
Channel setting is either Gch or the same as the global MIDI
channel.
In the case of Master Volume, the universal exclusive
message Master Volume will be transmitted only on the
global MIDI channel.
message Master Volume will be transmitted only on the
global MIDI channel.
You can use the MIDI Filter settings (page 10) to enable
or disable control changes and controllers for each tim‐
bre. If the setting is On, the above operations will be
enabled.
or disable control changes and controllers for each tim‐
bre. If the setting is On, the above operations will be
enabled.
Available
for AMS
Available
for Dmod
MIDI messages
Joystick
Damper
Foot
Switch
Foot
Pedal
Note-off
Note-on (note number)
Note-on (note number)
*
*
Note-on (velocity)
*
*
Poly aftertouch
*
CC
#
#
0 Bank select (MSB)
1 Modulation 1
1 Modulation 1
#(+Y)
*
*
*
*
2 Modulation 2
#(–Y)
*
*
*
*
3 –
4 Foot controller
4 Foot controller
*
*
*
5 Portamento time
*
6 Data entry (MSB)
7 Volume
7 Volume
*
8 Post Insert Effect panpot
*
9 –
10 Panpot
*
11 Expression
*
12 Effect control 1
*
*
13 Effect control 2
*
*
14 –
15 –
16 Controller (CC#16)
15 –
16 Controller (CC#16)
*
*
*
*
17 Controller (CC#17)
*
*
18 Controller (CC#18)
*
*
19 Controller (CC#19)
*
*
20 Controller (CC#20)
*
*
21 Controller (CC#21)
*
*
22...31 –
32 Bank select (LSB)
33...37 –
38 Data entry (LSB)
39...63 –
64 Damper
#
*
*
*
65 Portamento On/Off
*
*
*
66 Sostenuto
*
*
*
67 Soft pedal
*
*
*
68...69 –
70 Sustain level
71 Filter resonance level
72 Release time
73 Attack time
74 Filter cutoff frequency
75 Decay time
76 LFO1 speed
77 LFO1 depth (pitch)
78 LFO1 delay
79 Filter EG intensity
80 SW1 modulation On/Off
71 Filter resonance level
72 Release time
73 Attack time
74 Filter cutoff frequency
75 Decay time
76 LFO1 speed
77 LFO1 depth (pitch)
78 LFO1 delay
79 Filter EG intensity
80 SW1 modulation On/Off
*
*
81 SW2 modulation On/Off
*
*
82 Foot switch On/Off
*
*
*
83 Controller (CC#83)
*
*
84 –
85 Controller (CC#85)
85 Controller (CC#85)
*
*
86 Controller (CC#86)
*
*
87 Controller (CC#87)
*
*
88 Controller (CC#88)
*
*
89...90 –
91 Effect depth 1 (send 2 level)
*
92 Effect depth 2 (IFX 1–5 On/Off )
93 Effect depth 3 (send 1 level)
93 Effect depth 3 (send 1 level)
*
94 Effect depth 4 (MFX 1, 2 On/Off )
95 Effect depth 5 (EQ On/Off )
96 Data increment
97 Data decrement
98 NRPN(LSB)
99 NRPN(MSB)
95 Effect depth 5 (EQ On/Off )
96 Data increment
97 Data decrement
98 NRPN(LSB)
99 NRPN(MSB)
100 RPN(LSB)
0: Bend range
1: Fine tune
2: Coarse tune
1: Fine tune
2: Coarse tune
101 RPN(MSB) 0
102...119 –
Program change
Channel aftertouch
Channel aftertouch
*
*
Pitch Bend
# (X)
*
*
Universal exclusive
Master volume
*
Master balance
Master fine tune
Master coarse tune
Master fine tune
Master coarse tune