Uniden BCD996T 사용자 매뉴얼

31

These guidelines will help you install and set up your new scanner:

The BCD996T can be placed on a convenient surface in your home as a base 
station, and connected to a standard outlet that supplies 120VAC, 60Hz. You must 
use either the supplied antenna or an electrically correct outdoor antenna, properly 
and safely mounted at your chosen site.

The scanner is also designed to accommodate the DIN-E and ISO-DIN automotive 
mounting configurations. A DIN-E sleeve is supplied. 

The unit can also be placed above or beneath the dash of your vehicle using the 
supplied bracket and mounting hardware. 

• If your scanner receives interference or electrical noise, move the scanner or 

its antenna away from the source.

• To improve the scanner’s reception, use an optional external antenna 

designed for multi-band coverage. (You can purchase this type of antenna at a 
local electronics store). If the optional antenna has no cable, use 50-75 

Ω 

coaxial cable for lead-in. A mating plug might be necessary for the optional 
antennas. 

• Use an optional mono earphone or mono headset with proper impedance (32 

Ω) for private listening. Read the precautions on the inside front cover of this 
Owners Manual. 

• Do not use the scanner in high-moisture environments such as the kitchen or 

bathroom. 

• Avoid placing the scanner in direct sunlight or near heating elements or vents.

This is the simplest approach to let you get started quickly. Decide on a location 
that is convenient to a nearby wall outlet, has desk space to let you complete your 
programming worksheets, will safely allow the indoor antenna to be extended, or 
near a window to use an outdoor antenna.