Uniden BCD996T 사용자 매뉴얼

32

To secure the radio, by means of the mounting bracket, to a surface, follow the 
steps below:

1.

Attach the four protective rubber feet to the mounting bracket when you 
casually use the scanner on a flat surface. Should you desire to permanently 
mount the scanner, remove the feet and use wood screws through the bracket 
as described in Steps 2 and 3.

2.

Use the bracket as a template to mark positions for the two mounting screws. 

3.

At the marked positions, drill holes slightly smaller than the screws. 

4.

Align the bracket with the threaded holes on the sides of the radio case so the 
bracket is beneath the radio. Secure the bracket using the two threaded 
knobs. Never overtighten the knobs. 

Once the radio is positioned, connect it to a source of AC power using the supplied 
13.8V, 750 mA AC adapter. Insert the barrel of the AC adapter to the jack on the 
rear, upper right side of the radio marked 

.

Use only the Uniden-supplied AC adapter with this scanner.