Alsoft DiskWarrior - 4.0 지침 매뉴얼

 

DiskWarrior supports any Mac OS Standard (HFS) or Mac OS Extended (HFS Plus) disk 
including RAIDs, journaled disks, case-sensitive disks, FileVaults and iPods. DiskWarrior 
requires a G3 Mac or better (such as a G4, G5 or Intel Core-Duo) with built-in FireWire and a 
minimum 256 MB RAM (512 MB recommended) to startup and run from the DiskWarrior disc. 
To install, your must be started from Mac OS X  v. 10.3.9 or later.

The disk to be rebuilt must be locally connected, must not be write protected, and must have a 
valid partition map. If you plan to rebuild the directory on your startup disk, you need to start 
up from another disk capable of starting up Mac OS X  v. 10.3.9 or later, such as the DiskWarrior 
Disc (refer to 

 

To build a graph for the directory of a disk, all of the following must be true:

1)The disk must appear on the Desktop.
2)The disk must be an HFS (Mac OS Standard) or HFS Plus disk (Mac OS Extended).
3)The disk must be locally attached.
4)There must not be any detected hardware problems with the disk.

Make sure your DiskWarrior CD is compatible with your Mac. For the most current 
requirements, please visit our web site: http://www.alsoft.com/DiskWarrior/

Note: Older CRT-based iMacs must have the latest firmware update installed. You can find 
firmware updates for your iMac on the Apple Software Updates Web site: www.info.apple.com/
downloads/

 

As stated in the copyright notice in this manual, you may install and use DiskWarrior on any 
computer owned by you, for the purpose of performing its functions on any disk owned by you. 
However the software may not exist on more than one computer at a time.

 

DiskWarrior is not copy protected, so the Finder can be used to create a backup of the 
DiskWarrior package that you received.