Zephyr CTPE54BSX 사용자 매뉴얼

1.  Remove internal blower fl ange from motor 

housing by (6) screws.

2.  Secure internal blower to internal blower fl ange 

by (4) M4*16 screws from internal blower 
hardware.

3.  Secure AC power wiring box to internal blower 

fl ange by (2) M4*8 screws. 

4.  Secure ground wire to underside of internal 

blower fl ange by (1) 3/16*3/8 screw and (1) 
washer.

5.  Connect 9 pin molex connector from capacitor 

cable to 9 pin molex connector from internal 
blower.  

6.  Re-install internal blower fl ange to motor 

housing by (6) screws previously removed from 
step 1.