Samsung DV56H9000EP 정보 가이드

2

When an error occurs, the dryer will sound an error tone for 5 seconds and show one of the 
following Error Codes in its display continuously.

The Thermistor resistance is 
very low or high.

Check for: 
- Clogged lint screen. 
- Restricted vent system. 
- Check Thermistor resistance.

Dryer running with door open.

Check for: 
- Close the door and run the dryer. 
- Check for loose or open wire terminals in
  Door Sensing circuit.

Invalid door condition.

Check for: 
- Loose or open wire terminals in Door 
Sense circuit.

Key on display panel in invalid 
state.

Check for: 
- Check if display PCB circuit has short.

Invalid power source frequency.

Check for: 
- Not using regular power source frequency. 
- Faulty power frequency sense circuit.

Electronic control problem.
(Over Voltage Error)

Check for:
- Check PCB and Wire harness.
- Check Power supply.

Electronic Control Problem.
(Communication Error)

Check for: 
- Check PCB and Wire harness.
- Replace PCB.

Invalid state of Eeprom 
communication.

Check for : 
- PCB with Eeprom circuit.

Invalid heating Temp in running 
the dryer.

Call customer service.

To avoid risk of electrical shock, personal injury or death, disconnect power to dryer before 
servicing, unless testing requires power.

DV9000HA DRY_TECH MANUAL_DC68-03171F_EN.indd   2

2014-1-17   14:00:25