Samsung RF30HBEDBSR 사용 및 관리
English - 10
59.7" (1516 mm)
59.7" (1516 mm)
4
9
5
/8
"
(1
2
6
1
.5
m
m
)
49 5/8" (1261.5 mm)
CAUTION
When moving your refrigerator
To prevent fl oor damage, be sure the front
adjusting legs are in the up position (above the
fl oor).
Refer to ‘Adjusting the Level’ in the manual (on
page 15).
adjusting legs are in the up position (above the
fl oor).
Refer to ‘Adjusting the Level’ in the manual (on
page 15).
Flat-blade screw
Flat-blade screw
driver(-)
driver(-)
driver(-)
Control Lever
Control Lever
Flooring
For proper installation, you must place this
refrigerator on a level, hard surface that is the
same height as the rest of the fl oor. This surface
should be strong enough to support a fully loaded
refrigerator.
To protect the fi nish of the fl ooring, cut a large
section of the cardboard carton and place it under
the refrigerator where you are working. When
moving the refrigerator, you need to pull and push
it straight forwards or back. Do not wiggle it from
side to side.
refrigerator on a level, hard surface that is the
same height as the rest of the fl oor. This surface
should be strong enough to support a fully loaded
refrigerator.
To protect the fi nish of the fl ooring, cut a large
section of the cardboard carton and place it under
the refrigerator where you are working. When
moving the refrigerator, you need to pull and push
it straight forwards or back. Do not wiggle it from
side to side.
ACCESSORIES AND REQUIRED
TOOLS
TOOLS
The following accessories are included with your
refrigerator:
refrigerator:
Hex wrench
Required Tools (Not provided)
You need the following tools to complete the
installation of your refrigerator:
installation of your refrigerator:
Philips
screwdriver (+)
Flat-blade screw
driver (-)
Socket wrench
(13/32”) (10 mm)
Pliers
Allen wrench
(3/16”) (5 mm)
DA68-03030A-00.indb 10
DA68-03030A-00.indb 10
2014. 3. 19.
9:48
2014. 3. 19.
9:48