Monogram ZIX30GNHII 디자인 가이드
MATERIALS REQUIRED
• 1/4" copper water line tubing or GE SmartConnect
™
Refrigerator Tubing kits
• Water shut-off valve
• Custom panels for fresh food door, freezer drawer
• Custom panels for fresh food door, freezer drawer
and Convertible drawer
• Velcro w/adhesive if using custom toekick.
FLOORING
For proper installation, this refrigerator must be
placed on a level surface of hard material that is at
the same height as the rest of the flooring. This
surface should be strong enough to support a fully
loaded refrigerator, or approximately 1,200 lbs.
placed on a level surface of hard material that is at
the same height as the rest of the flooring. This
surface should be strong enough to support a fully
loaded refrigerator, or approximately 1,200 lbs.
NOTE: Protect the finish of the flooring. Cut a large
section of the cardboard carton and place under
the refrigerator where you are working.
section of the cardboard carton and place under
the refrigerator where you are working.
TOOLS REQUIRED
• 5/32" Allen wrench
• Utility knife
• Stepladder
• Bucket
• Level
• Appliance hand truck
• Tubing cutter
• 7/16" open-end wrench
• 1-5/16" open-end wrench
• #2 Phillips screwdriver
• Drill and bit set
• 5/16" socket
• Safety glasses
• Pliers
• 3/8" ratchet
• Torx T-20, T-30 wrench
• Utility knife
• Stepladder
• Bucket
• Level
• Appliance hand truck
• Tubing cutter
• 7/16" open-end wrench
• 1-5/16" open-end wrench
• #2 Phillips screwdriver
• Drill and bit set
• 5/16" socket
• Safety glasses
• Pliers
• 3/8" ratchet
• Torx T-20, T-30 wrench
HARDWARE SUPPLIED
• Anti-tip bracket & screws
• Panel mounting brackets
• Door panel templates- Pub # 31-46543
• Water filter - Part # GSWF
• Drywall Anchors and screws
• Panel mounting brackets
• Door panel templates- Pub # 31-46543
• Water filter - Part # GSWF
• Drywall Anchors and screws
Installation Instructions
12