Summit SINC424220 매뉴얼
Felix Storch, Inc. SUMMIT APPLIANCE
10
How to Use Your Cooktop
1. Getting Started
Before operating your induction cooktop, clean the surface (see
CLEANING YOUR COOKTOP for instructions) to remove any foreign
substances that may remain from packaging, shipping and installation.
Place usable cooking utensils in the center of the cooking zone and plug
the appliance in. The instruction power light will illuminate.
The following illustration shows a typical control panel for an induction
cooktop:
CLEANING YOUR COOKTOP for instructions) to remove any foreign
substances that may remain from packaging, shipping and installation.
Place usable cooking utensils in the center of the cooking zone and plug
the appliance in. The instruction power light will illuminate.
The following illustration shows a typical control panel for an induction
cooktop:
ON/OFF refers to the appliance power, while HEATING/TEMP and
TIMER refer to specific functions.
TIMER refer to specific functions.
2. Heating
HEATING is the default function of the induction cooktop. When pressing
ON/OFF, the heating light will illuminate and the cooktop will heat the
cookware at 1200W. The heat can be adjusted by touching ▲
ON/OFF, the heating light will illuminate and the cooktop will heat the
cookware at 1200W. The heat can be adjusted by touching ▲
and ▼.
There are ten levels of power, with 10 being the highest.
3. Temperature
When pressing TEMP, the induction cooktop will begin setting the
temperature and the TEMP light will illuminate. The default temperature
is 248ºF (120ºC). Temperature can be adjusted by touching the ▲
temperature and the TEMP light will illuminate. The default temperature
is 248ºF (120ºC). Temperature can be adjusted by touching the ▲
and
▼ buttons. Note that the temperature range is 140ºF to 464ºF (60ºC to
240ºC).
240ºC).