Summit ACR1717LH 정보 가이드
_________________________________________________________________________________________________
Date: November 12, 2012
Date: November 12, 2012
KLEA®134a
Revision 4
Page 4 of 7
Avoid trapping liquid between closed valves or overfilling containers as high pressures can
develop with an increase in temperature.
Avoid HFC-134a contact with flames or very hot surfaces.
Storage Requirements: Keep containers tightly closed, in a cool, well-ventilated place.
Keep containers dry. Keep away from incompatibles, open flames, hot surfaces, welding
operations, and other heat sources.
Storage Temperature: Store at temperature not exceeding 125°F. (52°C.).
8.
EXPOSURE CONTROLS/PERSONAL PROTECTION
EXPOSURE GUIDELINES:
INGREDIENT NAME: 1,1,1,2-Tetrafluoroethane
Mexichem Fluor Guideline
1000 ppm 8 hour TWA
WEEL (AIHA)
1000 ppm 8 hour TWA
No ACGIH TLV or OSHA PEL established.
Minimize exposure in accordance with good hygiene practice
Minimize exposure in accordance with good hygiene practice
.
PREVENTIVE MEASURES:
Engineering Controls: Use ventilation to maintain safe levels. Where appropriate
engineering controls are not in place or are inadequate, wear suitable respiratory equipment.
PERSONAL PROTECTIVE EQUIPMENT:
Eye Protection: Use chemical safety goggles or safety glasses and a face shield when
there is potential for eye contact.
Skin Protection: Take all precautions to prevent skin contact. Use gloves and protective
clothing made of material that has been found by user to be impervious under conditions of
use to prevent the skin from becoming frozen from contact with liquid. User should verify
impermeability under normal conditions of use prior to general use. Additional protection
such as an apron, arm covers, or full body suit may be needed depending on conditions of
use.
Respiratory Protection: Not normally needed if controls are adequate. If needed, use
NIOSH/MSHA approved respirator for organic vapors. For high concentrations and oxygen-
deficient atmospheres, use positive pressure air-supplied respirator.
Other Protection: Shower and eye wash station.
Engineering Controls: Use ventilation to maintain safe levels. Where appropriate
engineering controls are not in place or are inadequate, wear suitable respiratory equipment.
PERSONAL PROTECTIVE EQUIPMENT:
Eye Protection: Use chemical safety goggles or safety glasses and a face shield when
there is potential for eye contact.
Skin Protection: Take all precautions to prevent skin contact. Use gloves and protective
clothing made of material that has been found by user to be impervious under conditions of
use to prevent the skin from becoming frozen from contact with liquid. User should verify
impermeability under normal conditions of use prior to general use. Additional protection
such as an apron, arm covers, or full body suit may be needed depending on conditions of
use.
Respiratory Protection: Not normally needed if controls are adequate. If needed, use
NIOSH/MSHA approved respirator for organic vapors. For high concentrations and oxygen-
deficient atmospheres, use positive pressure air-supplied respirator.
Other Protection: Shower and eye wash station.