Bosch SPV68U53UC 작동 가이드

To save energy, the dishwasher is turned off 1 minute after the wash cycle ends. Auto Power Off can be
adjusted from P:00 to P:02.

To change the setting:
1

Press the [On/Off] button.

2      Hold down the “A” button (see page 14) and press [Start] until the display indicates “@:0x” (x can

be any number).

3      Release both buttons.
4      Press the “A” button until the display indicates “P:0x”.
5      Press the “C” button until the display corresponds with your requirements.

P:00 = dishwasher does not turn off automatically

P:01 = dishwasher turns off automatically after 1 minute

P:02 = dishwasher turns off automatically after 120 minutes (2 hours)

6      Press [Start] to save the setting.

An LED illuminates the floor to indicate the unit is running. If the appliance is installed at eye-level, the
LED is not visible. 

To change the setting:
1

Press the [On/Off] button.

2      Hold down the “A” button (see page 14) and press [Start] until the display indicates “@:00”.
3      Release both buttons.
4      Press the “A” button until the display shows “1:01”.
5      Press the “C” button to switch between “1:01” = ON and “1:00” = OFF and press [Start] to save.

Our AquaStop® system contains leaks through a precisely engineered tub and sensor system that works 
with our solid molded base. If a leak has occurred, it shuts down operation and automatically pumps 
out water to avoid contact with the floor. It works 24/7 and can turn itself on.