ATTO Technology 1500D/E 사용자 설명서
6
Installation: ATTO iPBridge 1500D
Exhibit 1.2-1 iPBridge 1500D back panel
Installation instructions
1
Place the iPBridge 1500D where you want it.
2
Connect SCSI devices to the iPBridge. (See
3
Connect the iPBridge to your SAN: attach CAT
6 or CAT 5E cables to the Ethernet port on the
iPBridge or connect an RJ11 and adapter
crossover serial cable (null modem) between
the iPBridge serial port and one of the
computer's serial COM ports.
6 or CAT 5E cables to the Ethernet port on the
iPBridge or connect an RJ11 and adapter
crossover serial cable (null modem) between
the iPBridge serial port and one of the
computer's serial COM ports.
4
Connect the power connector and power up.
5
Boot the computers on the SAN.
6
on page 13) or
the serial port (
7
Verify that the bridge can be accessed on the
local Ethernet network by using the
local Ethernet network by using the
Ping
utility.
8
9
Power cycle the iPBridge. The iPBridge will
automatically map the devices on startup.
automatically map the devices on startup.
air vents
power
connector
Power
LED
SCSI port
activity LED
Ethernet
speed LED
Ethernet
activity LED