Groupe SEB USA - T-FAL 14 L 사용자 설명서
36
ENG
Thank you for buying this TEFAL appliance,
which is intended for domestic use only.
Read the instructions in this leaflet
carefully and keep them within reach. They
apply to every version depending on the
accessories that come with your appliance
(NB: parts (A – 1) and (A/D – 8) are only
included with certain models).
which is intended for domestic use only.
Read the instructions in this leaflet
carefully and keep them within reach. They
apply to every version depending on the
accessories that come with your appliance
(NB: parts (A – 1) and (A/D – 8) are only
included with certain models).
TEFAL has an ongoing policy of research and
development and may modify these products without
prior notice.
development and may modify these products without
prior notice.
The drawings shown on page 2/3 illustrate
the instructions.
the instructions.
Assembly
Before first use:
• Remove any packaging, stickers or
accessories inside and outside the
appliance.
appliance.
* A/D: N.B. For models with a splatter guard
(1) and support legs (8): these parts come
packed between the reflector (6) and the
base of the appliance (7). Make sure that
you remove them before connecting the
appliance to the electricity supply.
packed between the reflector (6) and the
base of the appliance (7). Make sure that
you remove them before connecting the
appliance to the electricity supply.
• G: Firmly insert both lid supports (9) at the
rear of the appliance (only for the
Sensano model).
Sensano model).
• A/D: Assemble the support legs (8)
(depending on model) with the help of the
assembly leaflet delivered inside the bag
of the accessories.
assembly leaflet delivered inside the bag
of the accessories.
• A/D: Clean the grid (3) and the protection
lid (2) (depending on model) : follow the
instructions in the paragraph "After use".
instructions in the paragraph "After use".
A/D: Place the reflector (6) in the base of the
appliance (7): the curved part of the
reflector (6a) must be positioned towards the
front.
appliance (7): the curved part of the
reflector (6a) must be positioned towards the
front.
B/E: Place the heating element (4) on the
reflector (6) then press firmly on the control
panel (5) to position it in the housing
provided for this purpose, so that the safety
system is activated.
reflector (6) then press firmly on the control
panel (5) to position it in the housing
provided for this purpose, so that the safety
system is activated.
C/F: If the heating element is
incorrectly positioned, the safety
system will prevent the appliance
from working.
incorrectly positioned, the safety
system will prevent the appliance
from working.
A/D: Pour 1.5 litre maximum of water
carefully into the
reflector (6) so that the
appliance works.
carefully into the
reflector (6) so that the
appliance works.
A/D: Place the grid (3) on the appliance.
* Depending on model :
• A/D: Insert the support legs (8) inside the
legs integrated in the body of the appliance.
• A: Place the splatter guard (1) on the grid (3)
and insert it into the bars of the grid.
• H: Place the protection lid (2) inside the lid
supports (9) situated at the rear of the
appliance.
appliance.
Connection
and pre-heating
and pre-heating
A/D: If your appliance is not equipped with
support legs (8), place it on a firm heat
resistant surface.
support legs (8), place it on a firm heat
resistant surface.
Do not use it on a flexible type of support,
such as a rubberised protective cloth.
such as a rubberised protective cloth.
Never place the appliance directly onto a
fragile surface (glass table,
fragile surface (glass table,
cloth,
varnished furniture...).
To avoid overheating of the appliance, we
recommend you do not place it in a corner
or against a wall.
recommend you do not place it in a corner
or against a wall.
Unwind the cord completely.
Check that your electric installation is
compatible with the power and the voltage
indicated under the appliance.
compatible with the power and the voltage
indicated under the appliance.
Connect the appliance to a socket with an
earth connection.
earth connection.
Supply the appliance through a residual
current device (RCD) having a tripping
current not exceeding 30 mA.
current device (RCD) having a tripping
current not exceeding 30 mA.
If an extension cord is used:
- it must be with an incorporated earth
- it must be with an incorporated earth
connection;
- take every precaution to ensure that
people cannot become caught up in it.
If the power supply cord is damaged, it
must be replaced by the manufacturer or
must be replaced by the manufacturer or
EstivoSensano 18lang 05/05 13/6/05 16:48 Page 36