Groupe SEB USA - T-FAL 14 L 사용자 설명서

다운로드
페이지 8
37
ENG
its service agent or a similarly qualified
person in order to avoid a hazard.
Plug the cord into the mains.
Never plug the appliance in when not in
use.
Never use the appliance when it is empty.
DNever use the appliance with the
protection lid (2) (depending on model)
placed on the reflector (6).
If your appliance has an On/Off switch
(according to model), switch it to the On
position.
If your appliance has a thermostat (according
to model), turn it to the Max position.
Leave to pre-heat the appliance for 5 minutes.
On first use, the appliance may smell
slightly and possibly give off smoke for the
first few minutes – this is normal.
Never leave the appliance unattended
when in use.
Do not use charcoal or any other
combustible material in the appliance.
Cooking
After pre-heating, the appliance is ready to
be used.
Set the thermostat to the position of your
choice (depending on model).
Leave to cook depending on your taste.
Ensure that there is always water during the
use of the appliance.
A/DWhen water must be added during
cooking, avoid pouring it over the heating
element: pour the water between the
bars (3a) of the grill plate (3).
Do not touch metallic parts while the
appliance is on as they are very hot.
Do not cook food in tinfoil.
Never place aluminium foil or anything
else between the grid and the food to be
cooked.
Do not place cooking utensils to heat on
the appliance.
After use
If your appliance has an On/Off switch
(according to model), switch it to the Off
position.
If your appliance has a thermostat (according
to model), turn it to the mini position.
Unplug the appliance and allow it to cool.
A/D: The grid (3), the reflector (6), the
splatter guard (1) and the protection lid (2)
(depending on model) can be cleaned with a
sponge, hot water and washing up liquid.
Do not use a metal scourer or scouring
powder.
To  clean the grid (3), the sponge can be
replaced by a brush.
A/D: The heating element (4) does not need
cleaning.
If it is really dirty, rub with a dry cloth when
cold.
Never immerse the appliance in water with
its heating element and its cord.
Storage
A/D: Place the heating element (4) on the
reflector (6) then insert the control panel (5)
properly in its place.
A/D: Place the grid (3) on the appliance.
J: For the Sensano model, remove the control
panel (5) from its place and pull it forward in
order to replace the protection lid (2) correctly.
MADE IN FRANCE
Types 2182 - 2185 - 2285
EstivoSensano 18lang 05/05  13/6/05  16:48  Page 37