Epson II 사용자 설명서

The Epson GL Identity card allows you to install the Epson GL

printer mode on your printer. The printer has one slot for identity

cards.

The optional Epson GL Identity card requires a minimum of 1MB

additional memory. To add memory, see page A-13.

Compatible cards
In addition to the Epson GL Identity card, other cards may be

available for use with your printer. Check with your dealer for a list

of the cards.

When you use cards, follow these precautions:

Do not drop, crush, or bend cards. The card’s natural curvature

does not affect its operation, so do not try to straighten a card by

bending it.

Avoid touching the small gold connectors (contacts) along the

card’s edge.

If the card becomes dirty, clean the connectors by wiping the

edge with a clean tissue. Do not use water, alcohol, or other

solvents to clean the card.
Keep cards in their slip cases and blue anti-static bags when you

are not using them.

Do not store cards in direct sunlight or near a source of heat.

Cards can withstand temperatures ranging from -30°C to 65°C

(-20°F to 150°F) and can tolerate up to 90% humidity.
Be careful when you insert and remove a font card. You can

damage it by attempting to insert it the wrong way or by using

too much force.