Epson II 사용자 설명서

You can insert a card into the slot on 

the 

right side of the printer.

Never insert or remove a card while the printer is

on 

line, in SelecType mode, or while the printer is

resetting (after you press 

RESET).

Be careful 

when 

you insert or remove a card. You 

can

damage 

the 

card by trying to insert it the wrong way

or by using too much force.

1. Make sure that the printer is not in one of the following

conditions:

The 

FEED 

light is flashing fast. (The printer is receiving data

through the currently-selected interface.)
You are setting parameters using SelecType.
The display shows the RESET message.

2.

If 

the 

FEED 

light is on, make sure the printer is off line and press

FEED to 

print any data remaining in the buffer.

3.

Set the 

printer off line (make sure the 

ON LINE 

light is off) or turn

off the power.

4. Hold the card so that the large 

EPSON 

logo faces up and the

arrow is pointing toward the slot.