Epson II 사용자 설명서

To run the EPSON GL printer mode after inserting the identity card,

follow these steps:

1. Press SelecType until SelecType LEVEL2 appears on the display.

2. Press        until MODE ASSIGN appears.

Press         

4. Press          or          to select a channel for Epson GL mode.

Press   

6. Press          or          until EPSON GL appears.
7.

Press          to set the mode.

8. To exit SelecType, press the SelecType button.

Note: Once you set an option, the setting remains in effect until

you change it again or turn off the printer. If you want a setting to

remain in effect even when you turn the printer off and on, use

the P-CONFIG SAVE option in SelecType Level 2. See Chapter 4.

There are several restrictions on using the Epson GL identity card

with this printer.

Device control commands are ignored with optional interfaces

even if the interface is serial. Use the printer’s serial interface to

enable 

the 

additional device control commands.

The following restrictions apply when running the Epson GL

mode using Channel S with the AUTO-SENSE setting.

The power-on default channel becomes Channel S.

Channel S cannot receive any data 

when 

another channel is

running.
Channel S can be selected only 

when the FEED 

light is turned off.