Netgear M4100 사용자 설명서
78
|
Chapter 6. RIP
ProSafe M4100 and M7100 Managed Switches
•
In the Routing Mode field, select Enable.
d. Click Apply to save the settings.
2.
Assign IP address 192.150.3.1/24 to interface 1/0/3.
a. Select Routing > Advanced >IP Interface Configuration.
A screen similar to the following displays.
b. Scroll down and select the interface 1/0/3 check box.
Now 1/0/3 appears in the Interface field at the top.
c. Enter the following information:
•
In the IP Address field, enter 192.150.3.1.
•
In the Subnet Mask field, enter 255.255.255.0.
•
In the Routing Mode field, select Enable.
d. Click Apply to save the settings.
RIP for the Switch
Note:
Unless you have previously disabled RIP, you can skip this step
since RIP is enabled by default.