Netgear M4100 사용자 설명서

CLI: Enable RIP on the Switch

This sequence enables RIP for the switch. The route preference defaults to 15.

(Netgear Switch) #config

(Netgear Switch) (Config)#router rip

(Netgear Switch) (Config router)#enable

(Netgear Switch) (Config router)#exit

(Netgear Switch) (Config)#exit

Web Interface: Enable RIP on the Switch

Select Routing > RIP > Basic > RIP Configuration. 

A screen similar to the following displays.

For RIP Admin Mode, select Enable radio button.

Click Apply to save the setting.

RIP for Ports 1/0/2 and 1/0/3

The example is shown as CLI commands and as a Web interface procedure.