Zebra Technologies 105SLTM 사용자 설명서
71
Operations
Calibrate the Printer
6/30/06
105SL User Guide
11342L-001 Rev. A
Calibrate the Printer
Calibrate the printer when it is first put into service. Calibration allows the printer to establish
the proper settings for the specific media and ribbon used in your application. You may
calibrate the printer at other times as needed.
the proper settings for the specific media and ribbon used in your application. You may
calibrate the printer at other times as needed.
shows the different methods for
calibration.
Table 7 • Types of Calibration
Type of Calibration
Description
When/How It Occurs
Auto-calibration
The printer automatically sets the
value it detects for the spaces
between labels.
value it detects for the spaces
between labels.
Occurs at the following times:
• When the printer is first turned
• When the printer feeds media
• As part of both the sensor
profile and media and ribbon
sensor calibration procedures.
sensor calibration procedures.
Long (Standard) Calibration
The printer does the following:
• feeds media and ribbon
• sets the values it detects for
media length, media type
(continuous or non-continuous),
and print mode (thermal
transfer or direct thermal)
(continuous or non-continuous),
and print mode (thermal
transfer or direct thermal)
• updates the sensor values
To perform a long calibration, do
one of the following:
one of the following:
• Press
PAUSE
on the control
panel to pause the printer, and
then press
then press
CALIBRATE
.
• Select CALIBRATION for the
MEDIA POWER UP or HEAD
CLOSE parameter (see
CLOSE parameter (see
or
Short Calibration
The printer calibrates using the
current sensor values rather than
detecting the spaces between
labels and resetting the sensors.
This calibration sequence uses
fewer labels than the long
calibration sequence, but it is less
reliable because the values that are
stored in the sensors could be
incorrect.
current sensor values rather than
detecting the spaces between
labels and resetting the sensors.
This calibration sequence uses
fewer labels than the long
calibration sequence, but it is less
reliable because the values that are
stored in the sensors could be
incorrect.
Sensor Profile Calibration
The printer auto-calibrates and
prints a media sensor profile. See
prints a media sensor profile. See
Select the SENSOR PROFILE
option on the control panel. See
option on the control panel. See
for instructions.