Texas Instruments SM320F2812-HT 사용자 설명서
www.ti.com
SGUS062A – JUNE 2009 – REVISED APRIL 2010
3.4
Device Emulation Registers
These registers are used to control the protection mode of the C28x CPU and to monitor some critical
device signals. The registers are defined in
device signals. The registers are defined in
.
Table 3-7. Device Emulation Registers
NAME
ADDRESS RANGE
SIZE (×16)
DESCRIPTION
0x00 0880
DEVICECNF
2
Device Configuration Register
0x00 0881
reserved
0x00 0882
1
Not supported on Revision C and later silicon
Device ID Register (0x0003 – Silicon – Rev. C and D)
DEVICEID
0x00 0883
1
Device ID Register (0x0004 – Reserved)
Device ID Register (0x0005 – Silicon – Rev. E)
Device ID Register (0x0005 – Silicon – Rev. E)
PROTSTART
0x00 0884
1
Block Protection Start Address Register
PROTRANGE
0x00 0885
1
Block Protection Range Address Register
0x00 0886
reserved
378
0x00 09FF
3.5
External Interface, XINTF
This section gives a top-level view of the external interface (XINTF) that is implemented on the F2812
device.
device.
The external interface is a non-multiplexed asynchronous bus, similar to the C240x external interface. The
external interface on the F2812 is mapped into five fixed zones shown in
external interface on the F2812 is mapped into five fixed zones shown in
.
shows the F2812 XINTF signals.
Copyright © 2009–2010, Texas Instruments Incorporated
Functional Overview
39
Product Folder Link(s):