Netgear XM128 ISDN 사용자 설명서
Reference Guide for the Model XM128 ISDN Digital Modem
D-4
Status Registers and Result Codes
S-Register Descriptions
In most bitmapped S-registers, the default bit value is 0 (which is the normal situation) and only
the nondefault situation is described. Some reserved bits are for factory use, and the user should
not change them.
the nondefault situation is described. Some reserved bits are for factory use, and the user should
not change them.
describes each basic S-register. Values followed by an asterisk (*) are
the factory default settings.
Table D-3.
Basic S-registers ATSn=x
Command
Function and description
Default
S0=
Sets the number of rings on which the Model
XM128 modem answers; 0 value disables
auto-answer.
XM128 modem answers; 0 value disables
auto-answer.
000
S1=
Counts and stores number of rings from an
incoming call.
incoming call.
000
S2=
Defines escape code character, default [+]
(43 dec.).
(43 dec.).
043
S3=
Defines ASCII carriage return.
013
S4=
Defines ASCII line feed.
010
S5=
Defines ASCII backspace.
008
S7=
Sets duration, in number of seconds, that the
Model XM128 modem waits for a carrier.
Model XM128 modem waits for a carrier.
060
S8=
Sets duration, in seconds, for the pause and
repeat commands. For more information, refer
to Table C-1 on page C-2.
repeat commands. For more information, refer
to Table C-1 on page C-2.
002