Netgear XM128 ISDN 사용자 설명서
Reference Guide for the Model XM128 ISDN Digital Modem
Configuration
4-7
Entering DNs
You will need to enter the phone numbers given to your ISDN line. The phone numbers will be
cleared whenever the switch type is changed.
cleared whenever the switch type is changed.
1.
Type ATDN0=n and [Enter].
Where n is the 7-digit phone number.
You should receive the following response:
OK
2.
Type ATDN1=n [Enter].
Where n is the second 7-digit phone number.
You should receive the following response:
OK
3.
Type AT&W0Z0 and [Enter] to save the settings.
You should receive the following response:
OK
Setup for Europe and the United Kingdom
To configure your Model XM128 modem for Europe and the United Kingdom, follow these steps:
1.
Type the command AT&ZOI= and the ISDN telephone number to assign the outgoing
telephone numbers.
telephone numbers.
For example, AT&ZO=5551111
2.
Press [Enter].
3.
Type the command AT&ZOA= and the outgoing telephone number for PHONE 1.
For example, AT&ZOA=5552222
4.
Type the command AT&ZOB= and the outgoing telephone number for PHONE 2.
For example, AT&ZOB=5553333
5.
Assign a protocol using the commands in
Table 4-5
to configure the B channel protocol.