Netgear XM128 ISDN 사용자 설명서
Reference Guide for the Model XM128 ISDN Digital Modem
4-8
Configuration
For example, if the protocol you want is PPP, type the command ATB40&O2. For other X.75
or V.110 protocol options, refer to Appendix C, “AT Command Set Reference.”
or V.110 protocol options, refer to Appendix C, “AT Command Set Reference.”
6.
Assign the appropriate MSN telephone numbers, using the AT commands in
Table 4-6
.
For example, to assign an MSN number for a V.120 call, type the command AT&ZI2=5553434.
7.
Type the AT command AT&W0Z0 to store the information into NVRAM.
Table 4-5.
AT commands for setting protocols
Protocol
AT command
X.75 ATB00&O2
V.110 user rate - 38400 bps
ATB18&O2
V.120
ATB20&O2
PPP
ATB40&O2
Table 4-6.
AT commands for setting MSN
Multiple subscriber number
AT command
X.75 telephone number
AT&ZI0=telephone number
V.110 telephone number
AT&ZI1=telephone number
V.120 telephone number
AT&ZI2=telephone number
PPP telephone number
AT&ZI3=telephone number
ISDN Data (Protocol autodetection)
AT&ZI4=telephone number
PHONE 1
AT&ZI6=telephone number
PHONE 2
AT&ZI7=telephone number