TANDBERG D1320203 사용자 설명서
TANDBERG 3G Gateway
Data port Command Interface User Guide
3.
Connecting to the Data port Command Interface using Telnet
The TANDBERG 3G Gateway has one LAN port.
The 3G Gateway’s Telnet server provides access to the Data port Command Interface through a 10/100 base
T network interface supporting the TCP/IP protocol.
T network interface supporting the TCP/IP protocol.
When connected to the 3G Gateway, type tsh to start a t-shell from the command line. The Telnet client will
receive a welcome message similar to the following:
receive a welcome message similar to the following:
Welcome to <System Name>
TANDBERG 3G Gateway Release R3.0
SW Release Date: 2007-03-13
TANDBERG 3G Gateway Release R3.0
SW Release Date: 2007-03-13
NOTE! If the TANDBERG 3G Gateway has been protected with an IP password you will be prompted to
enter this password before you can access the Data port Command Interface via Telnet.
enter this password before you can access the Data port Command Interface via Telnet.
D1320203
6