Avaya S8500 사용자 설명서

You set the date, the time, and the time zone through the Maintenance Web Interface on the 
media server. You must use SAT commands to set the rules for daylight savings time. 

Note:

The Daylight Savings Rules screen reflects the new dates for Daylight Savings 
Time that take effect in 2007.

1. Type change daylight-savings-rules and press Enter.

2. In the Change Day, Month, Date, Time, and Increment columns, type the appropriate 

start and stop information for each rule. For example, 1:00 in the Increment field means to 
move the clock forward or back by one hour at the transition point.

You can set up to 15 customized daylight savings time rules. If you have media gateways 
in several different time zones, you can set up rules for these media gateways on a 
per-location basis. A daylight savings time rule specifies the exact time when you want to 
transition to and from daylight savings time. The rule also specifies the increment at which 
to make the transitions.

Note:

The default daylight savings rule is 0, which means that no daylight savings 
transition occurs. You can change any rule except rule 0. You cannot delete a 
daylight savings rule if the rule is in use on either the Locations screen or the 
Date and Time screens.

3. When you finish, submit the screen to save the changes.