Canon 700 Series 사용자 설명서

When Trouble Occurs

T

roub

leshooting

Cannot receive documents automatically.

Cause

<MAN.> is displayed.

Remedy

Set RECEIVE MODE to ‘AUTO RX’ from the RX SETTINGS menu. (See 
Chapter 4, “Receiving Documents.”)

Cannot receive documents manually.

Cause 1

There is a document set in the ADF (Automatic Document Feeder).

Remedy

You cannot receive if there is a document set in the Automatic Document 
Feeder. Remove the document and try again.

Cause 2

<AUTO> is displayed.

Remedy

Set the RECEIVE MODE to ‘MANUAL RX’ in the RX SETTINGS menu. (See 
“Receiving Documents Manually,” on p. 4-4.)

Cause 3

You pressed [Start] after you hung up the handset.

Remedy

When you hear a high pitched tone, press [Start] before you hang up the 
handset. Review the procedure for manual receiving with the optional handset 
kit installed on the machine. (See “Receiving Documents Manually,” on p. 4-4.)

The documents you receive are of poor quality.

Cause 1

Your toner cartridge is running low on toner.

Remedy

Remove your toner cartridge and rotate it five or six times to evenly distribute 
the remaining toner, and try receiving the document again. If this does not solve 
the problem, you should change the toner cartridge. (See Chapter 6, 
“Maintenance,” in the Reference Guide.)

Cause 2

The other fax machine is not functioning properly.

Remedy

The sending fax machine usually determines the image quality. Try copying a 
document on your own machine. If the copy is clean, then the other fax machine 
has a problem. Call the other party and ask them to clean the scanning glass on 
their fax machine.

Cannot receive a confidential document in your confidential mailbox.

Cause

The other party’s fax machine does not support ITU-T subaddress/password 
transactions.