Dimplex DS5603 사용자 설명서

10  

www.dimplex.com

①

 

Slide battery cover open on 

the hand held transmitter

 

(Figure 4).

②

 

Correctly install one (1) 12 Volt 

(a23) battery in the battery 

holder

.

③

 

Close the battery cover

.

 WARNINg:  Disconnect  

power before attempting any 

maintenance or cleaning to 

reduce the risk of fire, electric 

shock or damage to persons.

 CAUTION: Allow at least five 

(5) minutes for light bulbs to cool 

off before touching bulbs to avoid 

accidental burning of skin.
Light bulbs need to be replaced 

when you notice a dark section 

of the flame or when the clarity 

and detail of the log exterior 

disappears.  There are two bulbs 

under the log set which generate 

the flames and embers.

Tool Requirements:  Phillips 

screw driver
Helpful Hints
It is a good idea to replace all 

light bulbs at one time if they are 

close to the end of their rated life.  

Group replacement will reduce 

the number of times you need 

to open the unit to replace light 

bulbs.
Upper Light Bulb Requirements
Quantity of one (1) clear 

chandelier or candelabra bulbs 

with an E-12 (small) socket base, 

7 Watt rating. 

open door by pulling the 

1. 

step.  Failure to do so will 

result in these steps needing 

to be followed again.

This will synchronize the remote 

control transmitter and receiver.