Dimplex DS5603 사용자 설명서

11

handle.
Locate the upper bulb 

2. 

bracket.Bend light retainer 

bracket down.Locate and 

remove the light bulb.Insert 

new bulb.
Bend light retainer bracket 

3. 

back into its original position.
Close the door.

4. 
Lower Light Bulb Requirements
Quantity of two (2) clear 

chandelier or candelabra bulbs 

with an E-12 (small) socket base, 

60 Watt rating.

open door by pulling the 

1. 

handle.Remove the screw 

from the log set located in the 

center of the ember bed and 

remove the log set from the 

unit.
Locate and examine the bulbs 

2. 

to determine which bulb(s) 

required replacement. 
Locate and remove the light 

3. 

bulb(s).
Insert new bulb(s).

4. 

Install the log set into the 

5. 

unit, pushing firmly against 

the glass. Replace the log 

set retaining screw into the 

ember bed.
Close the door.

6. 

The clear door is cleaned in 

the factory during the assembly 

operation.  During shipment, 

installation, handling, etc., the 

clear door may collect dust 

particles, these can be removed 

by dusting lightly with a clean dry 

cloth.
To remove fingerprints or other 

marks, the clear door can be 

cleaned with a damp cloth.  The 

clear door should be completely 

dried with a lint free cloth to 

prevent water spots.  To prevent 

scratching, do not use abrasive 

cleaners or spray liquids on the 

clear door surface.

To remove fingerprints or other 

marks, the clear door can be 

cleaned with a damp cloth.  The 

clear door should be completely 

dried with a lint free cloth to 

prevent water spots.  To prevent 

scratching, do not use abrasive 

cleaners or spray liquids on the 

clear door surface.