Energizer FLEX8C 사용자 설명서

 

38

Next Generation:  
 
Our next generation recorders such as the HAWK/4, HAWK8, FALCON/4 use a 
black switch that slides into designated modes "ON" and "OFF 
 
If the remote record switch is attached to the RECORDER it must be used for 
ON/OFF control.  When the red slide switch is slid to the “ON” position a black 
dot appears and the recorder begins recording.   For special applications, ADS 
also makes a set of external microphones without the external ON/OFF switch. 
 

 
RCD/ON 
 
The "RCD red button “or “ON black slide switch " activates the HAWK to go into 
the record mode.  The LED turns red, then green within 2 seconds to indicate 
that the camera is attached. The LED will flash “red” following incoming audio 
while the unit is recording.  
 

The user should make a short “preamble” recording to check that 
everything is attached and working properly.  Make sure the red and green 
LEDS are present, if they are not, go to the nearest computer and make 
sure the memory has been erased and the batteries are new.  
 
 
                                                                 

 
If you are in PLAY mode, you must turn the unit "OFF" before you can enter 
the RECORD mode. During PLAY the RCD switch acts as the "FWD". 
 
STOP/OFF 
 
The "STOP red button " or “the OFF black switch” halts recording, and puts the 
unit in a low power state. The RECORDER logs the states of ”ON / OFF” and the 
date/time as “Session” information. 
  
 
PLAYBACK