Multi-Tech Systems MA220 사용자 설명서
Quick Start Guide
8
3. Continue to connect standard telephone cables to the remaining RJ11 jacks
on the back of the MultiAccess.
4 The
Command or CONSOLE jack is to be used with direction from Multi-
Tech’s Technical Support Personnel .
5. For the MA420 and MA820, ensure that the MultiAccess is securely and
permanently connected to an earth ground (GND) with a ground wire of 18
gauge (18 AWG) or thicker. The ground wire needs to be installed between
the grounding screw on the MultiAccess and a permanent earth ground.
gauge (18 AWG) or thicker. The ground wire needs to be installed between
the grounding screw on the MultiAccess and a permanent earth ground.
In order for the earth ground to be considered permanent, the grounding
wire must connect to the earth ground of the building’s electrical wiring
system and the ground connection must use a screw terminal or other
reliable means of fastening. The ground connection must not be as easily
disconnected as, for example, a power cord.
wire must connect to the earth ground of the building’s electrical wiring
system and the ground connection must use a screw terminal or other
reliable means of fastening. The ground connection must not be as easily
disconnected as, for example, a power cord.
6. On the MA220 unit, secure the power lead from the power source
to the
screw-on power connection on the backpanel of the unit.
On the MA420 and MA820 units, with the MultiAccess Power switch in the
off (
off (
Ο) position and using the supplied power cord, connect the MultiAccess
power plug to a live power outlet.
7. Place the MultiAccess Power switch to the on (
|) position for the MA420 and
MA820 to turn on the MultiAccess. The MA220 does not have a power
switch.
switch.
Setting Admin PC to Startup IP Address
1. Connect a PC to your network. Record the PC’s current IP address.
2. Set the PC IP address to 192.168.2.x subnet (using any address
excluding 192.168.2.1).
Logging In
1. Bring up a Web browser on your PC. At the browser’s address line, type
the default IP address:
http://192.168.2.1 and press Enter.
2. The
Login screen will appear. At this point you can be assured that the
MultiAccess is connected to the network.
3. At the Login screen, enter admin (all lower case) in the User Name field.
4. Enter admin (all lower case) in the Password field.
5. Click the Login button. The Home screen will appear. From this screen,
you can access all of the MultiAccess software screens.